Features
The features of your DTK-1651 pen display are described and illustrated below.
Refer to the printed Quick Start Guide that came with your pen display for instructions on set-up and connection. See About the DTK-1651 for a list of provided components.
- Power button: Located on the edge of the DTK-1651. Turns power on or off.
- Function toggle button: Located between the two rocker switches on the bezel. Toggles between the ExpressKeys and On-Screen Display (OSD) modes.
- Rocker switches: Two-position rocker switches on either side of the function toggle button. They are used to set ExpressKey functions, or in OSD mode to navigate and select in the OSD menu. See On-Screen Display settings.
- ExpressKeys: Four customizable positions on the two rocker switches. Set the ExpressKeys to perform frequently used functions or keystrokes, or to emulate button clicks or modifier keys. See Customizing the ExpressKeys.
- Pen holder: Magnetic holder beside the rocker switch to keep the pen attached to the bezel.
- Pen storage: Compartment on the back edge to store the pen.
- Pen tether holes: Anchor points on the bottom edge and side to attach the pen tether.
- Display stands: Built-in stands for portrait or landscape orientation. The DTK-1651 can also be used with a separate VESA-compliant stand. To view the stand and other accessories, go to the Wacom Store.
- Power LED: LED colors indicate the following states:
- Blue when a video signal is present.
- Orange for standby or suspend mode (power is on but no video signal is present).
- No light when the pen display is turned off.
- Status LED: LED lights blue when a pen tip, pen button, or device button signal is detected.
- Connectors and ports: Located on the edge of the DTK-1651:
- Connector and cover for the 3-in-1 cable
- HDMI Out port
- USB 2.0 hub port (2)
- Kensington Security Slot
 |
| Number |
Item |
| 1 |
ExpressKeys (4) |
| 2 |
Function toggle button |
| 3 |
Magnetic pen holder |
| 4 |
Power and Status LEDs |
| 5 |
Kensington Security Slot |
| 6 |
Power button |
| 7 |
Connector for 3-in-1 cable |
| 8 |
HDMI Out port |
| 9 |
USB 2.0 hub port (2) |
| 10 |
Stand legs for landscape orientation (2) |
| 11 |
Stand for portrait orientation |
| 12 |
Pen holder slot |
| 13 |
VESA stand mounting holes |
| 14 |
Rubber feet (4) |
| 15 |
3-in-1 cable cover |
| 16 |
Pen tether holes (2 sets) |
|